Small Scale Production Waste Incinerator Price For Industrial
/Municipal Waste
Rotary Kiln Incinerator Introduction:
Rotary kiln for Waste incineration (Rotary Kiln Incinerator) is
usually used to burn pretreated and homogenized waste that requires
size reduction, shredding, and manual sorting. The system consists
of a burning layer of waste in a rotating cylinder. Rotary Kiln
Incinerator is a widely used incineration equipment in the field of
international industrial waste treatment, its market share in the
field of industrial waste incineration is really high.
Applied material:
Hazardous waste, sludge waste, oily sludge, industrial waste,
municipal waste
Application:
Waste Treatment
Rotary kiln for Waste incineration (Rotary Kiln Incinerator) is
usually used to burn pretreated and homogenized waste that requires
size reduction, shredding, and manual sorting. The system consists
of a burning layer of waste in a rotating cylinder. Rotary Kiln
Incinerator is a widely used incineration equipment in the field of
international industrial waste treatment, its market share in the
field of industrial waste incineration is really high.
Rotary Kiln Incinerator Working Principle:
Rotary Kiln Incinerator can deal with solid and liquid waste
simultaneously, solid waste is sent into rotary kiln by special
conveying equipment, liquid waste is sprayed into the feed end of
the Rotary Kiln Incinerator body by means of an efficient atomizing
device, the waste in the rotary kiln should experience the process
of water evaporation, volatilization analysis, ignition and
combustion process, The ash portion is discharged from the bottom
of the second combustion chamber, the generated flue gas enters the
second combustion chamber, blended with two combustion air in the
second compartment, complete combustion of flue gas, achieve
exhaust safety standards discharge.
Specifications:
| Hazardous waste rotary kiln for waste incinerationφ2.6m*13.2
technical parameter. |
| Inner diameter of shell 2600mm | Shell length 13200mm |
| Downstream arrangement, that is, the direction of material flow is
consistent with the direction of smoke flow, the angle of the kiln
body is 1.5 degrees. |
| Variable frequency speed control of rotary kiln | 0.1-2.2r/min |
| Drive mode | Single side gear drive |
| Main Motor | 30kw |
| Kiln temperature:850-1200 degree | Surface temperature of kiln shell: 180 degree |
| Expansion mode | Linear free expansion at both ends |
| Total equipment weight | approx. 54.5t |
| ★Customized waste incineration rotary kiln can be provided
according to the customers' different industries |
Rotary Kiln Incinerator Structure:
1.The supports use rolling bearing which simplified bearing
structure. It reduces energy losses during Rotary Kiln Incinerator
operation and makes Rotary Kiln Incinerator easier to maintain and
repair;
2.In order to convenient installation and commissioning, there is a
kiln slow rotating devices to maintain kiln nonconventional running
operation while main transmission system is under overhaul or other
abnormal conditions which can occur cylinder bending and
deformation during the cooling process.
3.The Rotary Kiln Incinerator uses mechanical or hydraulic catching
wheels. They are high accuracy and reliability. The ridding rollers
and tires are evenly wearing on the entire width direction and are
handy adjustment.;
Rotary Kiln Incinerator Applicable material:
Hazardous waste, sludge waste, medical waste, steel mill flue ash,
sugar residue, paper mill residue, aluminum slag, pharmaceutical
filter residue, oily sludge, electroplating sludge, paint residue,
industrial waste, PVC material, municipal waste, domestic garbage,
batteries, tires, leather sludge, and so on.
