Enverinomental Friendly Ball Mill Crusher For Various Ore Materials
Ball Mill Introduction:
In the production industries of cement, silicate products, new
building materials, refractory materials, fertilizers, ferrous and
non-ferrous metal beneficiation and glass ceramics, ball mills are
the key equipment for crushing materials after they are crushed. It
can dry or wet pulverize various ores and other grindable
materials. The ball mill is suitable for grinding various ores and
other materials, and is widely used in mineral processing, building
materials and chemical industries.
Specifications of Mineral Ball Mill:
| model | cylinder rev(r/min) | grind media weight (t) | feeding size(mm) | output size(mm) | output (t/h) | motor |
| type | power |
| MQG900X1800 | 38 | 1.8 | ≦25 | 0.074-.06 | 0.8-1 | Y255M-8 | 22 |
| MQG900X3000 | 37.4 | 2.7 | ≦25 | 0.074-0.3 | 0.8 | Y225M-6 | 30 |
| MQG1200x2400 | 32 | 4.8 | ≦25 | 0.074-.06 | 1.5-2 | Y280M-8 | 45 |
| MQG1200X4500 | 30 | 5.2 | ≦25 | 0.074-.06 | 1.5 | Y280M-6 | 55 |
| MQG1500x4500 | 28.8 | 10 | ≦25 | 0.074-0.4 | 3-4 | JR126-8 | 110 |
| MQG1500x5700 | 28.8 | 12 | ≦25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1500x6400 | 28.8 | 13 | ≦25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1830x5400 | 24.5 | 15 | ≦25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG18306400 | 24.5 | 19 | ≦25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG1830x7000 | 24.5 | 20 | ≦25 | 0.074-0.4 | 6-8 | JR138-8 | 245 |
| MQG2200x7000 | 21.6 | 30 | ≦25 | 0.074-0.8 | 8-10 | JR158-8 | 380 |
| MQG2200x9000 | 21.4 | 34 | ≦25 | 0.074-0.8 | 8-10 | JR1510-8 | 475 |
| MQG2400x7000 | 20.4 | 36 | ≦25 | 0.074-0.8 | 10-14 | JR1510-8 | 475 |
| MQG2400x8000 | 20.4 | 42 | ≦25 | 0.074-0.8 | 10-14 | YR630-8 | 560 |
| MQG2600x8000 | 19.6 | 52 | ≦25 | 0.074-0.8 | 16-20 | JR1512-8 | 630 |
| MQG3000x9000 | 18.3 | 78 | ≦25 | 0.074-0.8 | 20-25 | YR1000-8/1180 | 1000 |
Factors Affecting the Output of Ball Mill
As a commonly used grinding equipment, the output of ball mill is
an important indicator to measure the quality of the ball mill. So
what are the factors that affect the output of the ball mill?
1. Mill volume. Generally, the larger the volume of the mill, the
greater the processing capacity.
2. The water content of the material. If the water content of the
material is too high, it will affect the uniformity of the feeding
and make the feeding time too long. Secondly, if the wet material
is fed too much, it may cause the phenomenon of "sticky grinding".
Therefore, the feed moisture is usually required.
3. Loading capacity of grinding body. After the mill runs for a
period of time, the output will decrease. This is because with the
impact and grinding of the grinding body in the cylinder, the
grinding body will wear out, so the grinding body must be refilled
in time. But it is not that the more abrasives, the better. If the
steel balls accumulate too high, the impact of the steel balls on
the material will be slowed down, and on the contrary, the grinding
output will be reduced.
