Customizable Lead Oxide Ball Mill Highly Efficient Reliable
Performance
Lead Oxide Ball Mill Introduction:
Ball mill for lead oxide is used to grind many kinds of mine and
other materials, or to select the mine, which is widely used in
building material, chemical industry, etc. There are two ways of
grinding: the dry process and the wet process. Ball Grinding Miller
can be divided into tabular type and flowing type according to
different forms of discharging material.
Competitive Advantages:
1. High grinding efficiency and low energy consumption;
2. The product fineness is uniform and the product is smooth;
3. Low vibration, low noise, good sealing of the equipment, no dust
overflow, clean environment, meet national environmental protection
requirements;
4. The special cement mill can be designed and manufactured
according to the different demands of users on the fineness and
output of grinding.
Lead Oxide Ball Mill Working Principle:
This Ball Grinding Mill is horizontal type and tubular running
device, has two warehouses. This machine is grid type and its
outside runs along gear. The material enters spirally and evenly
the first warehouse of the milling machine along the input material
hollow axis by input material device. In this warehouse, there is a
ladder scaleboard or ripple scaleboard, and different specification
steel balls are installed on the scaleboard, when the barrel body
rotates and then produces centrifugal force. Meanwhile, the steel
ball is carried to some height and falls to make the material
grinding and striking. After grinded coarsely in the first
warehouse, the material then enters into the second warehouse for
regrinding with the steel ball and scaleboard. In the end, the
powder is discharged by output material board andthe end products
are completed.
Specifications:
| Type | Rotation Speed Of Cylinder
(r/min) | Loading of Ball
(t) | Feeding Size
(mm) | Output Size
(mm) | Capacity
(t/h) | Motor Power
(kw) | Weight
(t) |
| Φ900×1800 | 38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 3.6 |
| Φ900×3000 | 38 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 4.6 |
| Φ1200×2400 | 32 | 3.8 | ≤25 | 0.075-0.6 | 1.5-4.8 | 45 | 12.5 |
| Φ1200×3000 | 32 | 5 | ≤25 | 0.075-0.4 | 1.6-5 | 45 | 12.8 |
| Φ1200×4500 | 32 | 7 | ≤25 | 0.075-0.4 | 1.6-5.8 | 55 | 13.8 |
| Φ1500×3000 | 27 | 8 | ≤25 | 0.075-0.4 | 2-5 | 90 | 17 |
| Φ1500×4500 | 27 | 14 | ≤25 | 0.075-0.4 | 3-6 | 110 | 21 |
| Φ1500×5700 | 27 | 15 | ≤25 | 0.075-0.4 | 3.5-6 | 132 | 24.7 |
| Φ1830×3000 | 24 | 11 | ≤25 | 0.075-0.4 | 4-10 | 180 | 28 |
| Φ1830×6400 | 24 | 23 | ≤25 | 0.075-0.4 | 6.5-15 | 210 | 34 |
| Φ1830×7000 | 24 | 25 | ≤25 | 0.075-0.4 | 7.5-17 | 245 | 36 |
| Φ2200×5500 | 21 | 30 | ≤25 | 0.075-0.4 | 10-22 | 370 | 48.5 |
| Φ2200×6500 | 21 | 30 | ≤25 | 0.075-0.4 | 14-26 | 380 | 52.8 |
| Φ2200×7500 | 21 | 33 | ≤25 | 0.075-0.4 | 16-29 | 475 | 56 |
