Reliable Quality High Screening Efficiency Vibrating Screen Machine
Low Power Consumption
Introduction:
ZK series linear vibrating screen developed this new series of
vibrating screen, based on the absorption from abroad experience
and combined with the national conditions.
The straight shaking movement is realizedby two unbalanced
gravities of high frequency screen. Two motors drive upperand lower
shaft separately do reversed rotation movements. The existing
forces,produced by synchronous opposite rotation and formed 30°with
screen face, are overlapped. At the same, existing forces inother
direction are offset. Then the single direction existing force is
formedso that the screen shaking reciprocally along straight line.
Because the screenis shaking along overlapped exciting force in
high frequency and no shaking inother direction, the screen is
working stably.
Our Advantages:
1. Sieve machine design, ingenious and easy to assemble, one person
can operate the screening machine.
2. Independent and other related brand manufacturers, compared with
a larger screen area and high efficiency of processing capacity.
3. Unique screen structure design, convenient and fast change
screen (only 3 to 5 minutes), in addition, this design allows the
use of a variety of screen (nylon, special dragon, PP nets).
4. The parent network to fully support the fine mesh, so fine mesh
scored a longer life, and reduce the supplies of fine mesh, the
production process and the long time can reduce a lot of cost.
Working Principle:
The screen is operated by electric motor to drive vibrator with
eccentric mass via delta belt, allowing screen box to vibrate, with
the motional orbit of the screen box being circular. The screen is
composed of screen box, vibrator, spring, damping, supporting under
frame and others, as shown in Fig.1. The screen box uses the
advanced ring groove rivet for connection to compose of frame
structure. The vibrator adopts eccentric shaft, eccentric block and
the spring damping device with steel spiral spring.
Specifications:
| Model | Screen deck | Max feed size(mm) | Motor power(kw) | Capacity(t/h) |
| Area(m3) | Installation slope(?) | | | |
| ZK1022 | 2.25 | -5-5 | <250 | 3X2 | 2.2 |
| ZK1230 | 3.6 | -5-5 | <250 | 4X2 | 2.6 |
| ZK1237 | 4.5 | -5-5 | <250 | 5.5X2 | 3.1 |
| ZK1437 | 5.25 | -5-5 | <250 | 5.5X2 | 3.2 |
| ZK1445 | 6.3 | -5-5 | <250 | 7.5X2 | 4.1 |
| ZK1637 | 6 | -5-5 | <250 | 5.5X2 | 3.5 |
| ZK1645 | 7.32 | -5-5 | <250 | 11X2 | 4.5 |
| ZK1837 | 6.75 | -5-5 | <250 | 11X2 | 5 |
| ZK1845 | 8.1 | -5-5 | <250 | 11X2 | 5.5 |
| ZK1852 | 9.45 | -5-5 | <250 | 11X2 | 5.9 |
| ZK2045 | 9 | -5-5 | <250 | 11X2 | 6 |
| ZK2052 | 10.5 | -5-5 | <250 | 11X2 | 6.4 |
| ZK2060 | 12 | -5-5 | <250 | 15X2 | 7.6 |
| ZK2445 | 10.8 | -5-5 | <250 | 15X2 | 7.4 |
| ZK2452 | 12.6 | -5-5 | <250 | 15X2 | 8.2 |
| ZK2460 | 14.4 | -5-5 | <250 | 15X2 | 9.2 |
| ZK3045 | 13.5 | -5-5 | <250 | 15X2 | 10 |
| ZK3052 | 15.75 | -5-5 | <250 | 22X2 | 10 |
| ZK3060 | 18 | -5-5 | <250 | 22X2 | 11 |
| ZK3645 | 16.2 | -5-5 | <250 | 22X2 | 12.2 |
| ZK 3652 | 18.9 | -5-5 | <250 | 22X2 | 13.4 |
| ZK 3660 | 21.6 | -5-5 | <250 | 22X2 | 14.3 |
| ZK 3675 | 27 | -5-5 | <250 | 30X2 | 17.1 |
| 2ZK1022 | 2.25 | -5-5 | <250 | 4X2 | 3 |
| 2ZK1230 | 3.6 | -5-5 | <250 | 5.5X2 | 3.7 |
| 2ZK1237 | 4.5 | -5-5 | <250 | 7.5X2 | 4.4 |
| 2ZK1437 | 5.25 | -5-5 | <250 | 7.5X2 | 5 |
| 2ZK1445 | 6.3 | -5-5 | <250 | 15X2 | 6.9 |
| 2ZK1637 | 6 | -5-5 | <250 | 15X2 | 6.9 |
| 2ZK1645 | 7.32 | -5-5 | <250 | 15X2 | 8.6 |
| 2ZK1837 | 6.75 | -5-5 | <250 | 15X2 | 7.9 |
| 2ZK1845 | 8.1 | -5-5 | <250 | 15X2 | 8.1 |
| 2ZK1852 | 9.45 | -5-5 | <250 | 15X2 | 9 |
| 2ZK2045 | 9 | -5-5 | <250 | 15X2 | 9.1 |
| 2ZK2052 | 10.5 | -5-5 | <250 | 22X2 | 10.1 |
| 2ZK2060 | 12 | -5-5 | <250 | 22X2 | 10.8 |
| 2ZK2445 | 10.8 | -5-5 | <250 | 22X2 | 11 |
| 2ZK2452 | 12.6 | -5-5 | <250 | 22X2 | 12.5 |
| 2ZK2460 | 14.4 | -5-5 | <250 | 22X2 | 13.5 |
| 2ZK3045 | 13.5 | -5-5 | <250 | 30X2 | 15.4 |
| 2ZK3052 | 15.75 | -5-5 | <250 | 37X2 | 16.9 |
| 2ZK3060 | 18 | -5-5 | <250 | 37X2 | 18.2 |
| 2ZK3645 | 16.2 | -5-5 | <250 | 45X2 | 21 |
| 2ZK3652 | 18.9 | -5-5 | <250 | 45X2 | 24 |
| 2ZK3660 | 21.6 | -5-5 | <250 | 45X2 | 25.4 |
