High Efficiency Flotation Machine 30-200TPH For Ore Dressing Low
Power Consumption
Introduction:
Flotation machine is applicable for the extraction of metals like
gold, argent, iron, lead, zinc, molybdenum, nickel and aluminum and
the separation of ferrous metals and non-metals. It can be used in
roughing, scavenging, selection or reverse flotation. In the
flotation process, after being mixed with drug, some qualified
mineral absorbs on bubbles, floats on the surface of slurry and
then is scraped out, other minerals still stay.
Working principle:
The tank is made as u type, reducing sand settlement to the least
.Due to reasonable design of the impeller structure and the
impeller space, impeller wearing is even. So the service life of
the impeller and stator are extended. Model KYF is unable to
spontaneously suck slurry, while has low power consumption. In
contrast, model XCF has the ability to automatically suck slurry,
and may be allocated horizontally without needing foam pump, but
consumes more power than model KYF. Therefore, model XCF and model
KYF are combined into a set, such as XCF as the sucking tank, and
KYF as the direct tank. The combined set can be arranged
horizontally without foam pump either.
When the flotation cells machine equipment works
1). The impeller of the flotation cells is driven by the spinning
engine triangle to form the centrifugal formation and produce the
negative pressure.
2). On one hand, large of inhaled air is mixed with the pulp;
3). On the other hand, the stirred pulp is mixed with the drug to
fine the bubble, to make a certain mineral bond on the bubble.
Adjust the height of the disc to control the liquid surface and the
useful bubble will be scraped out.
Advantages:
1). Excellent air-absorption capacity;
2). Low energy consumption;
3). Optimized design, the mineral slurry loops reasonably in cells
without any auxiliary equipment;
4). Self-control functions;
5). Special designed impeller can produce upper and lower
circulation of mineral slurry respectively.
SPECIFICATIONS
BF Series Flotation Machine
| model | Volume(m3) | Cell size(mm) | Impeller Dia.(mm) | Capacity(m3/min) | Power(kw) |
| BF-0.37 | 0.37 | 740x740x750 | 286 | 0.2-0.4 | 1.5/1.1 |
| BF-0.65 | 0.65 | 850x950x900 | 300 | 0.3-0.7 | 3/1.1 |
| BF-1.2 | 1.2 | 1050x1150x1100 | 450 | 0.6-1.2 | 5.5/1.1 |
| BF-2.0 | 2 | 1400x1450x1120 | 500 | 1-2 | 7.5/1.1 |
| BF-2.8 | 2.8 | 1650x1650x1150 | 550 | 1.4-3 | 11/1.5 |
| BF-4 | 4 | 1900x2000x1200 | 650 | 2-4 | 15/1.5 |
| BF-6 | 6 | 2200x2350x1300 | 700 | 3-6 | 18.5/1.5 |
| BF-8 | 8 | 2250x2850x1400 | 760 | 4-8 | 30/1.5 |
| BF-10 | 10 | 2250x2850x1700 | 760 | 5-10 | 30/1.5 |
| BF-16 | 16 | 2850x3800x1700 | 850 | 8-16 | 37/1.5 |
| BF-20 | 20 | 2850x3800x2000 | 850 | 10-20 | 37/1.5 |
| BF-24 | 24 | 3150x4150x2000 | 920 | 12-24 | 45/1.5 |
XCF/KYF Series Flotation Machine
| Model | Volume (m3) | Cell Size (mm) | Impeller Dia. (mm) | Impeller Speed (r/min) | Capacity (m3/min) | Power (kw) |
| XCF/KYF | 1 | 1000x1000x1100 | 400/340 | 358/281 | 0.2-1 | 5.5/4/1.1 |
| XCF/KYF | 2 | 1300x1300x1250 | 470/410 | 331/247 | 0.4-2 | 7.5/5.5/1.1 |
| XCF/KYF | 3 | 1600x1600x1400 | 540/480 | 266/219 | 0.6-3 | 11/7.5/1.5 |
| XCF/KYF | 4 | 1800x1800x1500 | 620/550 | 215/200 | 1.2-4 | 15/11/1.5 |
| XCF/KYF | 6 | 2050x2050x1750 | 620/550 | 215/200 | 3-6 | 15/11/1.5 |
| XCF/KYF | 50 | 4400x4400x3500 | 1200/1030 | 134 | 10-40 | 90/75/1.5 |
| XCF/KYF | 70 | 5100x5100x3800 | 1120/1120 | 121 | 13-50 | 90/90/1.5 |
| XCF/KYF | 100 | 5900x5900x4200 | 1260/1260 | | 20-60 | 132/110/1.5 |
