Good Price Active Lime Plant Equipment From Direct Manufacturer
INTRODUCTION
Active lime is produced from limestone, dolomite, chalk and other
minerals with high calcium carbonate content by the calcination
process under the temperature of 1000-1100 ° C. There are various
processes for the active lime production, mainly including:
Advanced 'Preheater-Rotary kiln-Vertical cooler' energy-saving
process, Traditional 'long rotary lime kiln' process, Mixed buring
vertical kiln process, Gas-fired or oil-fired vertical kiln process.
The selection of the active lime production project is effected by many factors, such as : the activity
requirement, the fuel, the limestone sizes, production capacity,
environmental-protection requirement. Low Investment Cost Cement
Lime Limestone Shaft Kiln Furnace for Sale
OUR ADVANTAGES
We can provide technological solutions and complete production
equipment for 50-1000TPD quicklime (active lime) production line.
We adopt the new type, energy saving and environmental system,
through which fuel consumption can be reduced 40%, output capacity
increased 30%.
1. Advanced Technology: The calcination process adopts pre-heater+
rotary kiln+ vertical cooler system, it can reduce the fuel
consumption 40%, and increase output capacity 30% due to reuse the
waste gas in the system.
2. High Automation Level: The Production line is arranged with
temperature and pressure monitoring instrumentation, operating
parameters of the computer display, the production line can adopt
the advanced computer control, to achieve automatic operation of
the entire system.
3. Mature Experience: We have professional engineer team, mature
experience, and over 100 successful project cases from home and
abroad, to maximize your investment costs and meet the customized
solution demand.
4. Good dust collecting treatment: The cyclone dust collector and
pulse bag filter can control the dust emission is lower than China
standard.
Mixed Burning Vertical Lime Kiln Process
The qualified raw materials and solid fuels are mixed uniformly
according to a certain proportion and then sent to the vertical
kiln through a single bucket elevator for calcination. After
calcination, the final lime products are discharged from the bottom
of the vertical kiln through a discharge device to the conveyor,
and the conveyor sends the final lime products to the storage silo.
The hot flue gas generated by calcination will firstly go into the
dust collecting system, and then the clean flue gas will be emitted
through chimney to the atmosphere.
