Automatic Auger Filler and Single Bucket Conveyor Prices from ZK
Introduction of TH Series Bucket Elevator:
TH Series Chain Bucket Elevator is a kind of continuous vertical
lifting equipment with chain type bucket to process bulk material.
It is mainly used for lifting bulk material and crushed material
with the property of low hardness. It is widely used in power,
chemistry, metallurgy, building material, light industry, grain,
mining and etc. The lifted material with the temperature under
250℃. It has the features of high capacity, reliable working, small
area needed, high lifting height and easy maintenance. In the
driving system, it has the high reliable non-return structure to
prevent temporary power off or other fault causing shut off under
the loading condition to make drive and lifting hopper return
moving to cause fault.
Application of Chain Bucket Elevator:
Chain Bucket Elevator is used for lifting powder, granular
materials and small block and grinding of small materials
vertically, such as: coal, cement, stones, sand, clay, ore and so
on. or other industries of dry mortar for construction, chemistry
and foodstuff.
Specification of TH Series Chain Bucket Elevator:
| Model | TH160 | TH250 | TH315 | TH400 | TH500 |
| Capacity(m³/h) | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket |
| 8 | 3.1 | 14 | 6.8 | 28 | 16 | 47.2 | 30 | 70 |
| Hopper | Bucket Type | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket | Light Bucket | Deep Bucket |
| Volume L | 1.1 | 0.65 | 3.2 | 2.6 | 5.2 | 4.4 | 10.5 | 10 | 15 |
Bucket Distance (mm) | 400 | 400 | 400 | 400 | 500 | 500 | 500 | 500 | 600 |
| Ring Chain | Pitch Qty | 7 | 7 | 9 | 9 | 7 |
| (mm) | φ14×50 | φ14×50 | φ18×50 | φ18×50 | φ22×75 |
| Chain Hook | (mm) | φ14×M12 | φ14×M12 | φ18×M14 | φ18×M14 | φ25×M20 |
| Bucket movement speed (m/s) | 1.0 | 1.25 | 1.25 | 1.25 | 1.37 |
| Drive Shaft Speed ( rpm) | 47.5 | 47.5 | 37.5 | 37.5 | 36.5 |
Introduction of TD Series Bucket Elevator
TD Series Bucket Elevator (Belt type) use belt as dragging device,
it mainly use for conveying material with bulk densityρ＜1.5t/m³in
vertical direction, which can be powdery material, particles, small
lump, less abrasive material. Use normal belt, the temperature of
conveying material should not exceed 60℃, Use wire belt, conveying
material temperature can reach 80℃,use heat resistant belt,
material temperature not exceed 150℃, elevating height is
4～30m.Normal model of TD type bucket elevator is
TD160,TD250,TD315,TD400 etc. conveying capacity is 3.1～66m³/h.
which is widely use in chemical engineering, metallurgy,
construction material, food, mining industries etc.
Application:
Bucket elevator is designed for vertical transportation powder,
granular materials and small block and grinding of small materials,
such as: coal, cement, stones, sand, clay, ore and so on.
Specification of TD Series Bucket Elevator:
| Model | Bucket Type | Capacity (m³/h) | Bucket Width (mm) | Bucket Pitch (mm) | Belt Width (m/s) | Bucket Running Speed (m/s) | Max Size of Material (mm) | Elevating Height (m) |
| TD160 | Q | S | 5～12 | 160 | 400 | 200 | 1.4 | 25 | ≤20 |
| TD250 | Q | S | 20～35 | 250 | 400 | 300 | 1.6 | 35 | ≤30 |
| TD315 | Q | S | 25～40 | 315 | 500 | 400 | 1.6 | 45 | ≤30 |
| TD400 | Q | S | 35～66 | 400 | 500 | 450 | 1.6 | 55 | ≤30 |
Introduction of NE Plate Chain Bucket Elevator:
NE Plate Chain Bucket Elevator adopt advanced technology from
domestic and abroad. This product suitable for vertical conveying
powder, granular, bulk and abrasive materials, such as limestone,
coal, proppant sand, gravel and so on. Material temperator can not
be higher than 200℃ and max lifting can not be more than 40m. block
materials, and also for large abrasion material.
Application of NE Plate Chain Bucket Elevator :
Widely used in construction, power, metallurgy, machinery,
chemical, mining industry and so on. The temperature of material is
below 200℃usually, the height can be reach to 40 meters. NE type
bucket elevator adopt flow-through loading, reducing the bucket
wearing from material efficiency. Improve the performance of bucket
elevator.
Specifications of NE Plate Chain Bucket Elevator:
| SPEC | Max Elevation Capacity(m³/h) | Power (KW) | Elevation Heigh (m) |
|
|
|
| NE15 | 16 | 1.5-4.0 | 6.28-30.78 |
| NE30 | 31 | 1.5-11 | 4.13-47.63 |
| NE50 | 60 | 1.5-18.5 | 4.13-49.13 |
| NE100 | 110 | 5.5-30 | 6.65-49.15 |
| NE150 | 165 | 5.5-45 | 6.1-52.6 |
| NE200 | 220 | 15-75 | 5.73-47.23 |
| NE300 | 320 | 15-90 | 4.23-54.73 |
| NE400 | 441 | 15-132 | 12.6-54.7 |
