Bucket Elevator of Cement Industryis / TD Series Belt Type Bucket
Elevator
Bucket Elevator Introduction:
Belt type bucket elevator use belt as dragging device, it mainly use for conveying material
with bulk densityρ＜1.5t/m³in vertical direction, which can be
powdery material, particles, small lump, less abrasive material.
Use normal belt, the temperature of conveying material should not
exceed 60℃, Use wire belt, conveying material temperature can reach
80℃,use heat resistant belt, material temperature not exceed 150℃,
elevating height is 4～30m.Normal model of TD type bucket elevator
is TD160,TD250,TD315,TD400 etc. conveying capacity is 3.1～66m³/h.
It is widely use in chemical engineering, metallurgy, construction
material, food, mining industries etc.
Bucket Elevator Application:
Bucket elevator is designed for vertical transportation powder,
granular materials and small block and grinding of small materials,
such as: coal, cement, stones, sand, clay, ore and so on. Or other
industries of dry mortar for construction, chemistry and foodstuff.
Our Advantages:
1. Widely usage, it can elevate powdery material, particles, small
lump material.
2. Flexible to select mixing or centrifugal discharge method
according to material properties.
3. Good sealing, no dust escape. Clean and environmental
protection.
4. Using rubber belt with small dead load, flexible, stable
operation, thus elevating speed and process efficiency is higher.
Technical Data:
| Model | Bucket Type | Capacity (m³/h) | Bucket Width (mm) | Bucket Pitch (mm) | Belt Width (m/s) | Bucket Running Speed (m/s) | Max Size of Material (mm) | Elevating Height (m) |
| TD160 | Q | S | 5～12 | 160 | 400 | 200 | 1.4 | 25 | ≤20 |
| TD250 | Q | S | 20～35 | 250 | 400 | 300 | 1.6 | 35 | ≤30 |
| TD315 | Q | S | 25～40 | 315 | 500 | 400 | 1.6 | 45 | ≤30 |
| TD400 | Q | S | 35～66 | 400 | 500 | 450 | 1.6 | 55 | ≤30 |
Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and
manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and
adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return
visit to customers.
In addition, we provide one-year warrantee to make sure your
machine runs consistently. We always keep certain inventory level
of spare parts, which means the replacements can be shipped to you
right away.
Welcome to visit our company and workshop, we sincerely look
forward to cooperating with you. We will provide you with the most
suitable products with the reasonable price.
