Vertical Roller Mill 1.5-110t/h Capacity / Vertical Roller Mill
Supplier
Recently year, because of the energy-saving advantage in cement
industry by vertical roller mill, the comprehensive benefit become more and more obvious, widely
application and popularize in power, metallurgy, chemical industry
and nonmetal etc.
Application of cement vertical raw mill
Cement vertical raw mill is used in grinding the non-inflammable
and non-explosive stuff with Moh’s hardness below 9.3 and humidity
less than 6%, such as barite, limestone, ceramics, slay, etc.
cement vertical raw mill is widely used in many industrial fields,
such as building, chemical, chemical fertilizer, metallurgy,
mining, nonmetal, abrasive, bearing materials, ceramic, steel,
thermal power, bricks & tiles, coal industry, etc. cement vertical
raw mill can grind these materials which are 9 or less on the
Meshesscale, and moisture is below 6%., and they should be
non-explosive and non-flammable mining materials.
Our Advantage
1. High grinding efficiency and low power consumption.
2. Low metal consumption in unit product.
3. Bed grinding with low noise.
4. Negative pressure and low dust pollution.
5. The technical process is simple and material grinding, drying
and separate can be achieved at the same time.
6. Small floor space, compact layout, system equipment with light
weight and low investment for civil construction.
Technical Data
| Model | Grinding plate(mm) | output(t/h) | output(×10kt/a) | Main motor power(kW) |
| diameter | Pitch | blast furnace slag | cement | Raw meal | blast furnace slag | cement | Raw meal |
| ZKRM08.2 | 1200 | 800 | 1.5~2 | 3~4 | 6~8 | 1.5 | 3 | 5.5 | 55 |
| ZKRM11.2 | 1500 | 1100 | 3~4 | 5~6 | 10~12 | 3 | 4.5 | 9 | 110 |
| ZKRM13.2 | 1700 | 1300 | 8~9 | 11~13 | 20~22 | 6 | 9.5 | 17 | 185 |
| ZKRM15.2 | 1900 | 1500 | 9~10 | 14~16 | 26~34 | 8 | 12 | 24 | 250 |
| ZKRM17.2 | 2100 | 1700 | 12~14 | 20~23 | 40~50 | 10 | 17 | 36 | 355 |
| ZKRM19.2 | 2300 | 1900 | 15~17 | 24~26 | 50~60 | 13 | 20 | 43.5 | 450 |
| ZKRM20.2 | 2400 | 2000 | 18~20 | 27~30 | 60~75 | 15 | 22.5 | 55 | 560 |
| ZKRM22.3 | 2600 | 2200 | 23~25 | 40~50 | 85~110 | 20 | 35.5 | 77 | 710 |
Remarks: the basic standard for vertical mill is asfollow:
(1) Power consumption:slag≤25kWh/t,cement≤18kWh/t,raw meal≤9kWh/t；
(2) Moisture content:slag≤15%,cement≤3%,raw meal≤7%；
(3) Ffinished product fineness: specificsurface area of slag
4200~112500px²/g,specificsurface area of cement 3300~380 cm²/g,raw
meal fineness-80μmR 12~15%；
(4) Moisture content of refined powder:slag 0.5~1.0%,cement
0.5~1.0%,rawmeal 0.5~1.0%；
(5) The specific installed capacity and parameterscan be adjusted
properly according to actual material nature.
(6) The above parameters are applicable forgranular blast furnace
slag, cement and raw meal and the model selection is determined by
material property.
