Lime Kiln Dust Collector Suppliers in China / Dust Collectors
Industrial
Dust Collector Introduction:
Induction furnace pulse jet bag filter primary metal scrap furnace
dust collector. For different working condition in steel plant , we
will provide special and expert filtration solutions for the dust
collection / dust extration systems for the fumes generated from
the melting furnace , sintering furnace , blast furnace / shaft
furnace ,induction furnace .
Dust Collector Features:
Except the features that it has high efficiency dust collecting,
big capacity of air rate, stable performance, and it is easy to
operate and maintain. The usage is better, for example: not easy to
let the powder stay, and it has wide applications. It is widely
used in the ventilation, dust removing and powder restoration in
the grain, food, feed, metallurgical, chemical, building material,
medical and other industries.
Dust Collector Our Advantages:
1. Advanced thin type lifting valve and off-line dust cleaning
device can gurantee to collect the dust completely.
2. Reasonable design for air inlet evenly flow tube and dust hopper
discharging device. This can resolve the problem the uneven air
flow of each chamber.
3. Bigger volume air bag can be suitable for both high pressure and
low pressure air supply.
4. Spring increase type is adopted on the top of filtering bag. It
has the advanages like good sealing performance, easy and fast bag
replacing, bag replacing outside the bag filter.
5. Design of filtering bag is different according to different
industry and application. The fabrication standards are increased
at approx. 50% based on the industry standard.
6. Solenoid pulse vale adpots high quality raw materia. Its mebrane
has longer using life.
7. Control system adpots advanded controller. It has 3 controlling
methods: pressure difference, timing and manual. Offline valve,
pulse valve and ash discharging valve are auotmatically controlled
by the system.
Technical Parameters Long Bag Pulse Dust Collector:
| Kiln type | Air volume(m3) | Filtration velocity (m/min) | Filter area(m2) | Equipment resistance(pa) | Bag size(mm) | Bag quantity | Cleaning method |
| ZM100 | 6000-7200 | 1-1.2 | 100 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM120 | 7200-8840 | 1-1.2 | 120 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM150 | 8000-10800 | 1-1.2 | 150 | 1200 | Φ130 | 100 | pulse cleaning |
| ZM200 | 12000-14400 | 1-1.2 | 200 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM250 | 15000-18000 | 1-1.2 | 250 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM300 | 18000-36000 | 1-1.5 | 300 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM350 | 21000-42000 | 1-1.5 | 350 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM400 | 24000-48000 | 1-1.5 | 400 | 1200 | Φ130 | 200 | pulse cleaning |
| ZM450 | 27000-54000 | 1-1.5 | 450 | 1200 | Φ130 | 200 | pulse cleaning |
