Efficient Mining Flotation Machine Easy Installation Superior
Performance
Introduction:
Flotation Machine is mainly used for separating copper, zinc, lead, nickel, gold and
other non-ferrous metals, and it can also be used for ferrous
metals and non-metallic rough and refined. Our company mainly
produces three kinds of flotation machine as follows:
- Mechanical Agitating Flotation Equipment With Auto Air Suction
New structure of impeller is backwards inclined double impellers
equipped with honeycomb duct and dummy bottom. Therefore, the
slurry in the tank will cycle upward and downward in a fixed flow
manner, which is helpful to the suspension of those coarse
particles. Air and slurry are naturally sucked without need for
foam pump.
- Mechanical Agitating Aeration Flotation Equipment Set
Models XCF and KYF are enforced aeration flotation machine. It has
a smaller diameter of impeller, thus lower peripheral speed, saving
30-50% of power. Because and air distribut or is equipped in the
tank, air is evenly dispersed. The impeller acts as a centrifugal
pump, so as to make the solid particles suspending. The tank is
mode as u type, reducing sand settlement to the least .Due to
reasonable design of the impeller structure and the impeller space,
impeller wearing is even, so , the service life of the impeller and
stator are extended. Model KYF is unable to spontaneously suck
slurry, while has low power consumption. In contrast, model XCF has
the ability to automatically suck slurry, and may be allocated
horizontally without need for foam pump, but consumes more power
than model KYF. Therefore, model XCF and model KYF are combined
into a set, i.e., XCF as the sucking tank, and KYF as the direct
tank. The combined set can be arranged horizontally without foam
pump either.
- Mechanical Agitating Flotation Machine with Auto Air Suction
The BF flotation machine impeller is composed of the closed double
frustum, may produce the strong slurry under to circulate, its
characteristic: (1) The suction intensity is big, the power loss is
low. (2) Each trough has the suction, attracts the thick liquid and
the flotation process function, from becomes the flotation process
return route, does not need any supporting facility, the level
disposition, is advantageous for the flow change. (3) The slurry
circulation is reasonable, can maximum limit reduce the coarse sand
precipitation. (4) Is equipped with the slurry surface automatic
control and the electrically controlled installment, the adjustment
is convenient.
Advantages of Flotation Machine
1. Self-absorption of air.
2. Good cycling property of pulp.
3. Flotation machine's suction volume is relatively stable.
4. Medium mixing strength and good suspension of solid particles.
5. The liquid level of the flotation machine is stable and it has
low power consumption.
BF Series Flotation Equipment
| Model | Volume (m3) | Cell size (mm) | Impeller Dia. (mm) | Capacity (m3/min) | Power (kw) |
| BF-0.37 | 0.37 | 740x740x750 | 286 | 0.2-0.4 | 1.5/1.1 |
| BF-0.65 | 0.65 | 850x950x900 | 300 | 0.3-0.7 | 3/1.1 |
| BF-1.2 | 1.2 | 1050x1150x1100 | 450 | 0.6-1.2 | 5.5/1.1 |
| BF-2.0 | 2 | 1400x1450x1120 | 500 | 1-2 | 7.5/1.1 |
| BF-2.8 | 2.8 | 1650x1650x1150 | 550 | 1.4-3 | 11/1.5 |
| BF-4 | 4 | 1900x2000x1200 | 650 | 2-4 | 15/1.5 |
| BF-6 | 6 | 2200x2350x1300 | 700 | 3-6 | 18.5/1.5 |
| BF-8 | 8 | 2250x2850x1400 | 760 | 4-8 | 30/1.5 |
| BF-10 | 10 | 2250x2850x1700 | 760 | 5-10 | 30/1.5 |
| BF-16 | 16 | 2850x3800x1700 | 850 | 8-16 | 37/1.5 |
| BF-20 | 20 | 2850x3800x2000 | 850 | 10-20 | 37/1.5 |
| BF-24 | 24 | 3150x4150x2000 | 920 | 12-24 | 45/1.5 |
